Waldorf M, Руководство пользователя

Страница: 47 / 91

Sound Parameters
47 M Manual
eis no further amount value needed here. Instead, full
pöositive modulation is always applied whenever a source
is selected. If you do not want to use any dynamic modula-
tion at all, select
Max as a source.
Sync&Env Page (only LFO1)
Here you find parameters regarding the LFO behaviour.
SYNC
Determines if the LFO is synchronised. If off is selected, the
LFO runs completely independent for each note and resets
on the note onset. Use
Humanize
to even furter enhance
this behavior. If on is selected, all LFOs of the M’s voices
used by the sound program behave as one. Use a modest
Humanize
value to imitate bad circuit design.
r
Use the option to emulate analog synths of the
1970s/1980s equipped with only one LFO
.
DELAY
Determines the start of the LFO EG (see next parameters).
ATTACK
Determines the attack of the simple useful AD envelope to
control the LFO 1 level. A setting of
0 gives instantaneous
attack after the
Delay
time has passed. 127 ist the longest
Attack time, requiring several minutes to fade in the LFO
completely.
DECAY
Adjusts the decay time of the LFO envelope. 0 does not
introduce any decay at all. Rather, the LFO will fade in
according to the Attack parameterand stay constant
throughout the keypress. To guarantee a smooth LFO
modulation, upon release of the key the LFO will follow the
VCA envelope curve in its release phase. In this configura-
tion, the LFO is turned into an AR (attack/release) envelo-
pe. Values of
1...127 adjust the decay time of the LFO enve-
lope, which now acts as an AD (attack/decay) envelope.
Sync Page (only LFO2)
Here you find parameters regarding the LFO 2 synchroni-
sation.