Waldorf M, Руководство пользователя

Страница: 67 / 91

The System Menus
67 M Manual
Device ID
Defines the device identification number for system exclu-
sive data transmission. Transmission will only be executed
successfully if the sender and receiver setting coincide.
Device ID 127 is a so-called broadcast ID that addresses all
connected M units. M can receive this from other devices,
but cannot send it itself. This function is limited to special
computer software.
CControls Send
Here you can determine, where all MIDI Control Change
(MIDI CC) data is being sent out for the panel pots, some
buttons, and encoder. If
off ist selected, no data is send out.
DIN means via DIN MIDI only, USB means via USB MIDI
only and DIN+USB means on both MIDI ports.
r
In the Appendix on page 82 you will find a MIDI
controller layout list for M.
CControls Receive
Here you can determine, if MIDI Control Change (MIDI CC)
data is received. If
off ist selected, all incoming MIDI CC
data will be ignored.
MIDI Clock Mode
Determines how M reacts to incoming MIDI Clock messa-
ges.
•
Int means that M doesn’t react to incoming MIDI Clock.
M only syncs to its own tempo base that is set by the
Speed dial or the BPM parameter which can found on
the Arp display page.
•
Ext means that M automatically syncs to incoming MIDI
Clock if it is sent by an external device like a sequencer
or drum machine.
•
Auto means that M automatically syncs to incoming
MIDI Clock if it is sent by an external device, but uses
its own tempo, if no MIDI clock signal is present.
MIDI Clock Send
Enables or disables the sending of MIDI clock for the desi-
red MIDI ports (DIN, USB or DIN+USB). This setting should
be enabled in those cases, where you want to use the M’s
arpeggiator as master for controlling the tempo.