Waldorf M, Руководство пользователя

Страница: 70 / 91

The System Menus
70 M Manual
VCF Tune Mainboard Page
Here you find the options for tuning the VCF filter voices.
s
Warning! If one of the VCF tuning options is selected,
M plays a tone for audible orientation. Please turn
down the overall volume before.
MB VCT TC Voice 1...8
Use the display encoder 1 to change the voice, it will stay
at resonance mode to tune. Use encoder 2 to tweak coeffi-
cient (they are reverse-meaning, i.e. to tune higher, you
need to set the oefficient LOWER and vice versa. Save the
tune coefficients with the settings by pressing
Store
. M
will load your settings on start, so no need to retune the
VCFs after fine-tuning anymore.
Please also remember about thermal drift, so at the start
with cold VCFs they will be tuned higher on about 2 semi-
tones. The best results could be achieved, when you will
tune the unit after ca. 15-20 minutes of warming up.
The best way is to make VCF fine-tuned on this screen
against C5 1042.5 Hz @ ~20C, is using software tuner. In
that case, the settings Cutoff 64 / Resonance 127 / Key
track 63 will exactly follow the equal-tempered scale
within 4-5 octaves (from C2 to C7 roughly). Lower C2 will
be under tune, higher C6 possibly C7 - over tune.
r
Of course, environment temperature plays a role. If
your studio room is on the top floor and it´s sum-
mer, we recommend to better tune the M in the
night.