Waldorf M, Руководство пользователя

Страница: 28 / 91

Sound Parameters
28 M Manual
GL RATE
Same functionality as for the
Glide Rate
panel parameter.
Osc Tweaks Page
Here you find parameters with additional settings for both
oscillators.
Oscillator 1 & 2 Tweaks display page
FIXPITCH 1 / FIXPITCH 2
Determines, if incoming MIDI notes will change M´s pitch
or not. If set to
off , incoming notes change the oscillator´s
pitch as defined by the corresponding MIDI note, as you
would usually expect. If set to
on , a note on message will
still trigger the oscillator, but the incoming pitch will be
ignored. The result is the same pitch for every key, the
default is MIDI note number 60 (C3).
OSCMODE
Same functionality as for the
Mode
button on the panel.
This settings is stored in a Sound program. Read more on
page 32.
ASICBUG (only in Classic mode)
The ASIC mixing bug is a special setting of the Waldorf M,
which allows it to reproduce this former issue and use this
for special sound design intentionally. Originally, this is a
numeric overflow bug in the Microwave I ES2 ASIC chip,
which produces a strong distortion of the sound if the sum
of the oscillator's level setting was greater than 8. This
effect was used by some sound designers to produce a
gritty harsh sounds. This option is switched off by default.
By activate it, the resulting effect could be checked by
using two oscillators with sine waves and mix level set-
tings that sum should be greater than 128.