Waldorf M, Руководство пользователя

Страница: 62 / 91

The Multi Mode
62 M Manual
PAN
Determines the position of the current Part within the
stereo panorama. The value range extends from
L-64 ,
which means far left, over the center position to R-63 ,
which means far right.
PANMOD
This setting decides whether a panning modulation (as set
in the part's chosen sound patch) is applied for the current
Part or not. When set to
off, no panning modulation is done
at all.
AUXOUT
Selects one of the 4 AUX audio outputs on which the cur-
rent Part’s signal will appear.
Limit Page
Here you find all parameters regarding key zone and ve-
locity settings.
K.LIM L
You can restrict the key range used for the current Part´s
tone generation. Only notes with a key number higher or
equal to the selected value are passed through. Set this
parameter to C#-2 if you want to use the full keyboard
range.
K.LIM H
Counterpart to the K.LIM L parameter. Only notes with a
key number lower or equal to the selected value are pas-
sed through. Set this parameter to
C7 if you want to use the
full keyboard range.
V.LIM L
This parameter allows you to limit the velocity range in
which the current Part is played. Only notes with a velocity
higher or equal to the selected value are passed through.
Set this parameter to
1 , if you want to turn velocity swit-
ching off.
V.LIM H
Counterpart to the V.LIM L parameter. Only notes with a
velocity lower or equal to the selected value are passed
through. Set this parameter to 127, if you want to turn
velocity switching off.
Tuning Page
Here you find all parameters regarding the tuning settings.