The Control Panel Sections
41
Waldorf Kyra
Oscillator Group 2 Controls
r
The operation and controls of Oscillator Group 2 are
similar but not identical to that of Oscillator Group 1.
For certain functions such as Hard Sync, FM and
Ring Modulation, Oscillator Group 2 has a different
role to Oscillator Group 1. The basic architecture of
the two Groups is the same though.
Select
The Oscillator Group
Select
button allows quick access to
the Oscillator Group 2 parameters for inspection or modi-
fication. Each press of the button will scroll through the
page groups that display the Oscillator Group's parame-
ters. Use the
Cursor Up/Down
buttons to access interme-
diate pages.
Tune
The
Tune
control sets the pitch of Oscillator Group 2 in
semitone steps from minus two to plus two octaves (rela-
tive to the pitch the note should be for the MIDI note play-
ed).
Detune
The
Detune
control sets the pitch of Oscillator Group 2 in
sub-cent steps from -50 cents (flatten by one semitone) to
+50 cents (sharpen by one semitone).
Pulse Width
In Wave Mode, the
Pulse Width
controls sets the pulse
width of the pulse component of the Oscillator Group.
Saw Level
In Wave mode, the
Saw Level
control sets the basic level of
the sawtooth component of the Oscillator Group.
