WAGO 765-1103/100-000 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 110

background image

765-1103/100-000

Functions

Product manual | Version: 2.2.0

27

16DO FLD PN DC 24V 2.0A

Table 22: Parameterization Overview

Tool

PROFINET Modules and
Submodules

Port Configuration

PROFINET IO-Controller

The PROFINET IO-Con-
troller configures the
PROFINET modules and
submodules of the Series
765 module.

The IO-Controller sets the parameter the user selects
on the basis of the parameters in the GSDML file.
These parameters configure each individual port and
determine whether the port is used as a digital input or
digital output (or is disabled).

WAGO I/O Field Web-
server

–

Yes

WAGO App I/O Field

–

Yes

WAGO IO-Link Configura-
tor

–

Yes

Note

Parameters via PROFINET are always rewritten upon restart

Each time PROFINET communication starts up, the IO-Controller transfers the configura-
tion and parameters to the 765 Series module. Port configuration parameters that were
set by the WAGO I/O Field Webserver, the WAGO I/O Field app or the OPC UA client are
overwritten. Parameters via PROFINET take precedence.

If you have changed parameters of the port configuration via the WAGO I/O Field Web-
server, the WAGO App I/O Field, the WAGO IO-Link Configurator or the OPC UA Client,
please note that these changes are initially applied by the module, but the I/O controller
overwrites the port configuration again at the next start-up. If you want to change parame-
ters of the port configuration, set them in the configuration software of the I/O controller.

5.5.2 WAGO Webserver I/O Field

The WAGO I/O System Field module has an integrated Webserver. It can be accessed
with a standard Web browser in order to use the following functions:
• Display port information for ports X01, X02 etc.
• Display and modify module settings.
• User setup and management, as well as user login and logout
• Reset module to factory settings and restart firmware.
• Simulating inputs; forcing outputs

Examples of port information include:
• Display current measured values for the digital outputs: temperature, voltage, current

and state on pins 1, 2 and 4

• Display the status information for the entire port
• Configure ports, e.g. set operating mode
• Show process data

The module settings include:
• Select method for obtaining IP address
• Select the origin of the configuration data used
• Display and enter maintenance information
• Reset module to factory settings.
• Load firmware onto the module
• Display and set parameters for Bluetooth

®

connection to the module

«
...
25
26
27
28
29
...
»

Содержание 765-1103/100-000















































































































Отзывы:

Нет отзывов

Похожие инструкции для 765-1103/100-000

Бренд: Jäger Страницы: 50

Бренд: Laskomex Страницы: 36

Xsential QUAD-RO

Бренд: Watermark Страницы: 8

DHI-IPMECD-3021 Series

Бренд: Dahua Technology Страницы: 28

Wave SoundTouch IV series

Бренд: Bose Страницы: 32

Бренд: urmet domus Страницы: 52

AutoLift AL-6000S2

Бренд: AAQ Страницы: 36

Бренд: Aiphone Страницы: 2

Kaysun Aquantia R-32 PRO

Бренд: Frigicoll Страницы: 44

Бренд: S&S Northern Страницы: 12

Бренд: V-Tec Страницы: 12

Бренд: Vaillant Страницы: 56

Бренд: Alphatec Страницы: 2

Бренд: JETI model Страницы: 64

Бренд: DEVI Страницы: 2

Бренд: red lion Страницы: 8

Бренд: Zamel Страницы: 58

Бренд: Commax Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды