WAGO 765-1103/100-000 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 110

background image

765-1103/100-000

Functions

26

Product manual | Version: 2.2.0
16DO FLD PN DC 24V 2.0A

The measurements are performed for the module and for pin 1, pin 2 and pin 4 of each
port. The measured values can be displayed in the WAGO I/O Field Webserver or the
WAGO I/O Field app. Alternatively, an OPC UA client can read out the measured values
and display them.

In the module, the measured values are compared to limiting values. An alarm or event is
generated if a value falls above or below a limiting value (e.g., a temperature limiting
value). The module can send this alarm/event
• to the OPC UA client upon: OPC UA: event.

The OPC UA client application can use the measured values, for example to implement
load management. You can find information on load management in

8

Designing the

Power Supply [

.

5.4 Overload protection

The module has built-in overload protection and periodically measures the current, volt-
age and temperature.

If the output current, supply voltage or temperature exceeds the maximum value, the
module switches off a pin/port

5.5 Parameterization Tools

5.5.1 Overview

There are several ways to set the product’s parameters. The following table provides an
overview of the tools.

Table 21: Overview of Parameterization Tools

Tool

Description

Control with PROFINET
IO-Controller

The

PROFINET IO-Controller

must be configured to exchange process data with

the Series 765 modules. The GSDML file

GSDML-Vx.xx-wago-series765-yyyym-

mdd.xml

describes the WAGO I/O System Field module. The PROFINET IO-Con-

troller configuration software imports this GSDML file, and the user can configure
and parameterize one or more Series 765 modules. The user loads the configura-
tion onto the PROFINET controller. The PROFINET controller configures and pa-
rameterizes the Series 765 module via PROFINET.

WAGO I/O Field Web-
server

The

WAGO I/O Field Webserver

is a Webserver that is integrated into the 765

Series module. With a Web browser, users can view the Web pages and display
and modify parameters.

WAGO App I/O Field

The

WAGO I/O Field app

is an app for mobile devices that can communicate with

a 765 Series module via Bluetooth

®

. With the app, the user can parameterize the

765 Series module, read and write process data and display diagnostics.

WAGO IO-Link Configura-
tor

WAGO IO-Link Configurator

is software for configuring the WAGO IO-Link mas-

ters and the IO-Link devices.

A distinction is made between two parts of the configuration and parameterization:

1.

PROFINET configuration

: PROFINET modules and submodules

2.

Port configuration

: digital input or output

The following table shows which tool can influence which section.

«
...
24
25
26
27
28
...
»

Содержание 765-1103/100-000















































































































Отзывы:

Нет отзывов

Похожие инструкции для 765-1103/100-000

Бренд: Federal Signal Corporation Страницы: 12

Бренд: Federal Signal Corporation Страницы: 8

Бренд: Panasonic Страницы: 2

RXD15 - RADIO CASSETTE W/CD

Бренд: Panasonic Страницы: 8

Бренд: salmson Страницы: 12

Бренд: ICP DAS USA Страницы: 4

PROX-BOOSTER 2G

Бренд: Nedap Страницы: 25

Бренд: Panasonic Страницы: 16

Бренд: Watts Страницы: 12

Бренд: Magnavox Страницы: 78

Бренд: M-system Страницы: 10

R7F4HEIP-DAC16C

Бренд: M-system Страницы: 7

AQUIS ULTRAFLOW

Бренд: Waterous Страницы: 217

Бренд: AMX Страницы: 88

Бренд: Digital Acoustics Страницы: 14

Бренд: salmson Страницы: 195

AeGIS 8000 PLUS

Бренд: PACH & COMPANY Страницы: 30

Бренд: KOCOM Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды