Replacing the pen nib
To protect your pen display from scratches and for best performance, replace your pen nib when
it becomes too short or has a sharp edge. A nib should be replaced when it is approximately 1
mm (1/25 inch) in length. Replacement nibs and a nib removal tool are provided inside the pen
case.
If you need pen nibs or other accessories, please visit the Store page of the Wacom website.
To replace the pen nib:
1.
Clasp the old nib and pull it straight out of the pen using the nib removal tool, a pair of tweezers,
needle-nosed pliers, or similar tool.
2.
Slide the end of the new nib straight into the barrel of the pen and push the nib slowly and
firmly until it stops.
Note: Stroke nibs are spring-loaded, providing additional tactile feedback when you are working
an Airbrush. They are installed in the same manner as a standard pen nib.
Wacom Tablet Properties overview
Use the Wacom Tablet Properties to customize your pen tablet or tools. When you open Tablet
Properties, icons for all connected tablets and all tools that have been used on the tablet are
displayed in the
Tool
list, as well as a
Touch
icon for tablets with touch. All settings apply to the
selected tablet or pen display.
To customize, make changes to the controls available on the tabs for ExpressKeys, Display
Toggle, Touch Ring, and other features. Changes will take effect immediately. Click
Default
to
return to the factory settings. You can use your keyboard tab and arrow keys to navigate around
Tablet Properties.
Tool Tips are available for most Tablet Properties items. Position the screen cursor over an item
and let it rest there. The appropriate Tool Tip will pop up in a few moments.
