After setting an ExpressKey or pen side switch to Display Toggle, you can use it to toggle the
current tablet mapping between a base mapping and other monitors. The display options are:
Pen display to desktop
toggles the screen cursor from Cintiq to the entire system
desktop. Press the button a second time to return the cursor to Cintiq.
Pen display to other displays
toggles the screen cursor from Cintiq to another active pen
display or monitor. The cursor toggles to each connected display in turn, then returns to
the Cintiq where the first toggle began.
Active Area
options determine the size of the area where the pen will function on the pen
display.
Force Proportions
adjusts the size of the active area to maintain correct vertical and
horizontal proportions between Cintiq and the entire desktop or display. Depending on
your settings, some portions of the active area may no longer be usable when this option
is selected. When deselected, the correct scale or proportions are not maintained.
Use Inset Area
limits the active area to a sizing of 6 x 8 inches. If
Force Proportions
is
also selected, this sizing may be less. When deselected, as much of the active area as
possible will be used for tablet-to-display mapping.
Important: When using application-specific settings with Display Toggle, be sure that each
customized application in the
Application
list (including
All Other
) has a tool button or
ExpressKey assigned to Display Toggle.
Any of the following actions will return the toggle sequence to the base mapping:
Launching a graphics application that supports pressure sensitivity.
Logging out of or rebooting the system.
Switching users.
Placing the system in sleep mode.
Changing the Display Toggle settings.
Changing the resolution or number of displays on your system.
