Note: Administrator rights are required to delete preferences for all users.
Using the Cintiq stand
In landscape orientation, the Cintiq stand can be used in one of three inclined positions. After
attaching the stand, adjust the display incline:
1.
Place the Cintiq on a flat, stable surface.
2.
Place the stand with the aluminum surface down and the three tabs facing up.
3.
Decide which of the inclines you want to use.
4.
Hold the Cintiq upright so you can see the back.
5.
Place the tab at the bottom edge of the stand into the slot in the lower edge of the Cintiq.
6.
Keeping the lower tab in the slot, tilt the Cintiq toward the stand and insert the tab for the
incline you want to use into the other slot. Make sure both tabs are fully inserted into the
slots.
Using your Cintiq
Your new Cintiq will be ready to use after setup and installation of the driver software. Please
see the printed Quick Start Guide that came with your Cintiq for a list of components, and
instructions for setup and driver installation.
For the Cintiq 13, Cintiq Companion Hybrid, Cintiq 22, Cintiq 24, and Cintiq 27, you will need
to install the driver for your pen tablet to work correctly. You can download and install the driver
from the Wacom website, for both Windows and Mac operating systems. The driver for the
Cintiq Companion and Cintiq Companion 2 is pre-installed.
