WABECO D2400, Руководство по эксплуатации

Страница: 2 / 39

2
Dear customer!
Congratulations on choosing the WABECO Universal Lathe . We have taken great care in its
manufacture and we have given it a thorough quality control test.
These operating instructions are to help you to work with it safely and properly.
Therefore, please read the respective instructions carefully and pay attention to them.
After unpacking the machine please check to see if any kind of damage has occurred during
transportation. Any complaints must be made immediately. Complaints made at a later date cannot
be accepted.
If you have any questions or need any spare parts, please quote the machine number located on
the front of the motor (see nameplate).
Duplications or copies of this document of any kind, or of exerts, require a written approval
by WABECO
Disposal of the lathe
The transport and protective packagings are made up of the following materials:
- corrugated cardboard
- polystyrene free of freon
- polyethelene foil
- non-returnable wooded pallet (untreated)
- Euro pallet (deposit)
If you have no further need of these articles or do not wish to use them again, please dispose of them
at the public recycling facilties.
The lathe consists of up to 98% of recyclable materials, i.e. steel, cast iron, aluminium and 2% of
chemical materials, e.g. the coating of electrical leads, printed circuits.
If you have trouble disposing of these parts in a proper manner, we would be pleased to help you.
Upon mutual agreement we will take the complete machine back and dispose of it. However, the costs
for transporting the machine to our plant must be at your expense.