W6 N 1235-61, Руководство пользователя

Страница: 43 / 54

www.w6-wertarbeit.de 43
Darning
Darning using an embroidery frame
For darning holes.
1 Lift the presser foot. Use the feed dog
cover to cover the feed dog.
2 Cut the frayed edges of the hole to be
darned and clamp the fabric tightly into
the embroidery frame. We recommend
placing or ironing iron-on stabiliser under
the defective spot.
3 Remove the presser foot holder (see
page 13) and lower the presser foot lifter.
4 Sew the area to be darned with
reinforcing stitches that are not too large.
5 Sew lines that are close together and of
the same length in longitudinal direction.
Move the embroidery frame evenly so
that the darned area will look good.
Round movements help prevent holes at
the turning points.
6 Fill the hole by sewing transverse lines.
Note
Remove the feed dog cover after completion
of the work.
Please note:
The embroidery frame is not included in the
scope of delivery.
Inserting the feed dog cover