May 2, 2011
PRODUCT DESCRIPTION
Packaging and Features
6
Part Number 11694 Rev 1.6
JACE-700
MOUNTING AND WIRING GUIDE
|
Figure 2 JACE-700 main controller board and 2 option cards uninstalled.
As a JACE-7 series controller, the JACE-700 features a PowerPC 440EPx processor,
1GB Flash storage, and 1GB DDR-2 RAM. TCP/IP access is via two standard Gigabit
Ethernet ports, and serial communications ports (RS-232, RS-485) are also standard.
One or two option cards can be added for additional communications, e.g.
LonWorks FTT-10, or another RS-232 port. A MiniPCI slot is also available for WiFi
802.11b/g support. The JACE-700 uses the QNX Neutrino operating system, with
either the Sun Hotspot JVM (in AX-3.6 or later units) or IBM J9 JVM (AX-3.5 units).
Two status LEDs are visible atop the cover. Two USB 2.0 ports are provided, as well
as integral contact inputs to allow system monitoring of UPS power and battery, and
an external enclosure door. A rechargeable NiMH battery pack is included inside the
unit, and a separate connector provides recharging and monitoring of an external
12V sealed lead-acid battery (customer supplied).
The table below provides a summary of features of the controller.
.
Table 1
JACE-700 controller features and options.
Model
Description
Ports
JACE-700
DIN-mountable controller. PowerPC 440Epx 652 MHz pro-
cessor, 1GB NAND Flash storage, 1GB DDR-2 system RAM.
Includes integral NiMH battery pack, two open enhanced
comm option card slots, one open MiniPCI slot (for WiFi
802.11g option card).
Not furnished is NPB-PWR-UN universal power supply, or
external 12V sealed lead-acid battery and harness.
Two 1GB Ethernet,
RJ-45
One RS-232 Serial,
DB-9 male
One RS-485 Serial, iso-
lated, with 15V/12Vdc
power, 6-position plug
on right side.
Two USB-2.0 ports on
top side of controller.
Main controller board
Removed
option cards
DIN-mount base with screw
tabs for panel mount
Connector ports
NiMH battery pack
and shield removed
USB ports (2)
