background image

 

May 2, 2011

PRECAUTIONS

Static Discharge Precautions

10

Part Number 11694  Rev 1.6

JACE-700

 

MOUNTING AND WIRING GUIDE

|

Static Discharge Precautions

Static charges produce voltages high enough to damage electronic components. The 
microprocessors and associated circuitry within a JACE-700 controller are sensitive 
to static discharge. Follow these precautions when installing, servicing, or operating 
the system:

Caution

• Work in a static-free area. 

• Discharge any static electricity you may have accumulated. Discharge 

static electricity by touching a known, securely grounded object. Do not 
handle printed circuit boards (PCBs) without proper protection against 
static discharge. Use a wrist strap when handling PCBs.  The wrist strap 
clamp must be secured to earth ground.

Battery Precautions

Caution

• The NiMH battery used in this device may present a risk of fire or 

chemical burn if mistreated. Do not disassemble, heat above 122ºF 
(50ºC), or incinerate. Replace battery pack with type 
10SN-2/3AA60H-W-J1 (NPB-J700-BATT) only. Use of another battery 
may present a risk of fire or explosion.

• Dispose of used battery promptly. Keep away from children. Do not dis-

assemble and do not dispose of in fire.

• Replace external backup battery with Listed Power Source Battery Only.

WEEE (Waste of Electrical and Electronic Equipment) 

Recycling of Electronic Products: (International Installations)

In 2006 the European Union adopted regulations (WEEE) for the collection and 
recycling of all waste electrical and electronic equipment. It is no longer allowable to 
simply throw away such equipment. Instead, these products must enter the recycling 
process. To properly dispose of this product, please take it to a local recycling center.

If a local recycling center cannot be found, please return it to one of these offices:

Tridium Europe Ltd
1, The Grainstore
Brooks Green Road
Coolham, West Sussex
RH13 8GR United Kingdom

Tridium  Asia Pacific Pte Ltd
17 Changi Business Park Central 1
Honeywell Building
Singapore 486073

Tridium, Inc.
2256 Dabney Road, Suite C
Richmond, VA 23230

Содержание JACE-700





































Отзывы: