May 2, 2011
ABOUT THIS GUIDE
Related Documentation
4
Part Number 11694 Rev 1.6
JACE-700
MOUNTING AND WIRING GUIDE
|
About This Guide
This document covers the mounting and wiring of the Vykon®
JACE-700 (J-700)
controller. It assumes that you are an engineer, technician, or service person who is
performing control system installation. Instructions in this document apply to the
following products:
Note
Not covered in this document is the Niagara
AX
software installation and
configuration required for a fully functioning unit. Refer to the
JACE
Niagara AX Install and Startup Guide
for this information.
In addition, the mounting and wiring of JACE expansion options are
covered in separate documents. See the section
Related Documentation
For more information on configuring and using the JACE-700 controller, consult the
following documents:
• JACE NiagaraAX Install and Startup Guide
• IO-16-485 Mounting and Wiring Instructions
• NPB-LON Option Install Sheet
• NPB-2X-485 Option Install Sheet
•
NPB-232 Option Install Sheet
• NPB-MDM Option Install Sheet
• NPB-GPRS Modem Option Install Sheet
• NPB-ZWAVE Option Card Install Sheet
• NPB-SED-001 Option Card Install Sheet
• NPB-SRAM (Static Ram) Option Install Sheet
• JACE 7 WiFi Option (T7-WIFI) Install Guide
• NiagaraAX Nrio Guide
•
NiagaraAX JACE WiFi Option - Engineering Notes
• NiagaraAX User Guide
Model
Description
J-700
DIN mount JACE-7 series controller, powered by separate plug-in power supply
module or wall mount AC power adapter. Controller supports optional external
I/O expansion modules and internal communications option cards.
NPB-PWR-UN
90–263Vac universal input/15Vdc output power supply module, DIN mountable.
WPM-
XXX
Wall-mount universal AC power adapter, with different models available,
where -
XXX
is either: -US, -EUR, or -UK (vary by AC wall plug).
