May 2, 2011
WIRING DETAILS
About MiniPCI Cards
18
Part Number 11694 Rev 1.6
JACE-700
MOUNTING AND WIRING GUIDE
|
About MiniPCI Cards
The controller has one (1) available MiniPCI slot—see
on page 14. This slot
supports a specific 802.11 wireless (WiFi) adapter option, model T7-WIFI.
Note
The JACE-700 requires NiagaraAX 3.6 or later for WiFi support. Please
refer to the
JACE 7 WiFi Option (T7-WIFI) Install Guide
for mounting
details, and the
NiagaraAX JACE WiFi Option - Engineering Notes
document
for NiagaraAX platform configuration.
Wiring Details
See
on page 14 to locate connectors and other components on the
JACE-700 controller.
Make connections to the controller in the following order.
1
Install any option board (LON, RS-485, RS-232, etc.) in the available option slots.
See
page 16 for a procedure. For complete details,
refer to the specific documentation that accompanied the option.
2
Connect communications cables. See
page 18 for
ports available on the controller’s base unit. For ports on any installed option
board (485-PWR, LON, RS-485, modem) see the specific mounting and wiring
guide for any additional details.
3
Apply power to the unit. See
“Power Up and Initial Checkout,”
Communications Wiring
Communications ports on the controller are primarily on the bottom side of the
unit, with ports also on the right side and top (
). Communications port types
include:
•
•
Note
Prior to connecting cables, provide strain relief for them to prevent
damage to the controller.
