VWR Puranity TU 12 UV+, Инструкция по эксплуатации

Страница: 61 / 84

VWR Puranity TU+ |
53
Maintenance |
Chapter 13
Cleaning
NOTE!
The Puranity TU+ systems can only be disinfected as a 'stand-alone' process.
If the system was longer time not in operation a cleaning must be performed.
Cleaning should be performed at regular intervals, such as when the ultrapure cartridge is
exhausted and must be changed, or when there is bacteria present the pure water.
Depending on the version of your Puranity TU+ system (with internal 5L tank Puranity TU
3+/6+ or Puranity TU 12+ with external tank), a complete cleaning will take between 1 to
5 hours.
Required for cleaning is a cleaning adapter (171-1148).
Use the following disinfecting agents for cleaning:
Cleaning Solution, 1 syringe, (171-1124).
NOTE!
To ensure effective cleaning of your system the internal 5L or external tank must be filled
completely with water.
There is no need to worry should you notice a chlorine smell during the entire cleaning
process, as there is no risk of the limit for chlorine gas in closed rooms being exceeded.
CAUTION
If your skin should come into contact with a chlorine product, rinse it immediately with ample,
fresh water. If your eyes come into contact with the disinfecting agent, rinse them immediately
with ample, fresh water and contact a physician at once.
WARNING
Observe the information provided on the data sheet supplied with the CLEANING Solution to
avoid any possible health hazards.
Always wear protective gloves when handling the cleaning solution.
Always wear safety goggles when handling the cleaning solution.