VTI Instruments EX1000A, Руководство пользователя

Страница: 126 / 320

VTI Instruments Corp.
126 EX10xxA Function Calls
API Description
vtex10xxA_get_arm_count Returns the arm count value.
vtex10xxA_get_arm_delay Returns the arm delay.
vtex10xxA_get_arm_infinite Returns the enabled status of an infinite arm
count.
vtex10xxA_get_arm_lan_eventID Returns the event ID of a LAN arm event.
vtex10xxA_get_arm_lan_filter Returns the filter for the LAN arm event.
vtex10xxA_get_arm_source Returns the enabled arm source events.
vtex10xxA_get_arm_sourceEx Returns the arm source events including LAN
events.
vtex10xxA_get_calibration_file Returns the calibration file data for the specified
buffer.
vtex10xxA_get_calibration_running Indicates if calibration is currently in progress.
vtex10xxA_get_channel_conversion Returns the engineering units (EU) conversion of
a specified channel.
vtex10xxA_get_channel_range Returns the input range of a voltage channel.
vtex10xxA_get_channel_type Returns whether specified channel is voltage or
thermocouple only channel.
vtex10xxA_get_dio_input Returns the current input state of the digital I/O
port.
vtex10xxA_get_dio_limit_event Returns the enabled DIO limit events.
vtex10xxA_get_dio_limit_event_invert Returns the inverted operation of a DIO channel
linked as a limit event.
vtex10xxA_get_dio_limit_event_latch Returns the latch operation of a DIO channel
linked as a limit event.
vtex10xxA_get_dio_output Returns the programmed output state of the digital
I/O port.
vtex10xxA_get_dio_output_enable Returns the output enable state of the digital I/O
port.
vtex10xxA_get_fifo_config Returns the data format and overflow behavior of
the FIFO memory.
vtex10xxA_get_fifo_count Returns the number of data pages (scans) in the
FIFO memory.
vtex10xxA_get_filt_freq Returns current low-pass filter cutoff frequency of
a specified channel.
vtex10xxA_get_init_cont Returns the enabled status of init continuous
mode.
vtex10xxA_get_lan_event_domain Returns the LAN domain for the instrument.
vtex10xxA_get_lan_event_source_state Returns the current arm and trigger state of the
LAN events.
vtex10xxA_get_lan_eventlog_count Returns the number of event log entries logged in
the instrument.
vtex10xxA_get_lan_eventlog_enabled Returns the current status of the event log.
vtex10xxA_get_lan_eventlog_overflowmode Returns the LAN event log overflow mode.
vtex10xxA_get_limit_set0 Returns the limit set 0 values of a specified
channel.
vtex10xxA_get_limit_set0_manual Returns the manual entry control of limit set 0
values of a specified channel.
vtex10xxA_get_limit_set1 Returns the limit set 1 values of a specified
channel.
vtex10xxA_get_linear_correction Returns linear correction of a voltage channel.
vtex10xxA_get_model
Returns the instrument’s model name.
vtex10xxA_get_OTD_enable
Returns a channel’s open transducer detection
status.
vtex10xxA_get_ptp_info
Returns the instrument’s PTP master and
synchronization information.
vtex10xxA_get_scanlist Returns the current scan list.
vtex10xxA_get_self_test_result Returns the self test result (Currently supported
only in RX10xx)
vtex10xxA_get_self_test_running Returns the running status of self test result.
(Currently supported only in RX10xx)
vtex10xxA_get_serialNumber Returns the serial number of the device.