VTEL vista pro, Руководство по установке

Страница: 11 / 31

with a pencil, outlining the desired position of the mounting bracket.
7. Remove the paper liner from the bottom of the wedge.
8. Carefully align the assembly with the location marks you made. Press down firmly over
the entire surface to set the adhesive.
Mounting to the Monitor
Attaching Cables to the Sony PTZ Camera
1. Unwind the large cable bundle behind the primary (or single) monitor and route the
camera cables straight up behind the monitor to the camera(s).
2. Connect cables to the Sony PTZ camera as follows:
Connect To
Yellow Camera S-Video cable (in cable bundle) S-Video connector on the back of the camera
Round, black 5-pin VISCA In cable (in cable bundle) VISCA IN connector on the back of the camera
Camera power cable (in cable bundle) DC IN power connector on the back of the camera
If purchased as a platform system, use the following table:
Connect From To
Yellow Camera S-Video cable
S SS S
----
VIDEO OUT VIDEO OUT VIDEO OUT VIDEO OUT
connector on the back of
the camera
CAMERA CAMERA CAMERA CAMERA
----1
1 1
1 port on the back of the
expansion chassis
Round, black 5-pin VISCA In
cable
VISCA IN
VISCA IN VISCA IN
VISCA IN
connector on the back of the
camera
COM COM COM COM----2 2 2 2 port on the back of the Vista PC
Camera power cable
DC IN DC IN DC IN DC IN
power connector on the back of
the camera
CAMERA CAMERA CAMERA CAMERA
P
PP
P
OWER OWER OWER OWER
connector on the back of
the Vista PC