VTEL vista pro, Руководство по установке

Страница: 20 / 31

Chapter 7
System Controls
In the previous chapters you completed all hardware aspects of the system setup. However, before
you can operate your system for the first time, you must perform the initial software setup as
described in this chapter.
When you turn your system on, Windows will prompt you for your user information and Windows
registration key (packaged with the system). Once completed, VCS installation begins
automatically. As part of the VCS software installation, you see the
Expert screen, where you can
begin the software configuration.
At a minimum, you must provide the System , Cameras and Network information. The other
settings have factory defaults that work well under most circumstances. However, if you
purchased additional options for your system, you must install them using the
Installed Options
screen.
Once you have completed the configuration settings, press the Back Back Back Back button to automatically save
your changes and continue installing the VCS software. When the installation is finished, restart
your computer when prompted.
You can always return to the system configuration program after installation is complete if you
wish to view the current settings, or install/remove options, for example. For information on
running the system configuration program after installation, see the “Reconfiguration” section.
QuickTouch RCU
QuickTouch RCU
Rather than “switching” between devices to control your conferences, VTEL’s QuickTouch RCU is a
dual-function device that gives the user a unique setting in which to videoconference. We made it
easy for the user to switch between “modes” - from hand-held to desktop. When in the open
position, a fully functional PC keyboard is available to the user. When in closed position, the device
is used as a remote control unit. Virtually, you are in control of all applications and options when
using our QuickTouch
RCU.
Features
Our new RCU adds the “extras” touch to videoconferencing. You can use the device in remote
mode, or use its fully functional keyboard to enter information as you would with our
wireless/wired keyboards. The RCU features a mouse/trackball; left- and right-click buttons that
reverse to natural keyboard positions when open; and control buttons integrated with Vista’s
options to display and send slides, toggle SmartView on or off, take a snapshot, use the VCR and
PIP functions, or access all menus through the VCS Pop
Pop Pop Pop----up up up up. You can pan, tilt, zoom your cameras,
or press the Call Call Call Call button to connect to conferences. The Alert Alert Alert Alert button, in a future release, will allow
the user to notify/signal an SVNM operator that assistance is needed. The Profile button is not
available in release 3.0. There is more to learn about the QuickTouch RCU in the table following.
The keyboard features a “Function” Function” Function” Function” key which enables the alternate function of dual-use keys
such as Page Up, Page Dn, F1-F12, etc..