VTEL vista pro, Руководство по установке

Страница: 8 / 31

Chapter 3
Installing Monitors
This chapter describes how to install a monitor on your VTEL cabinets.
Adding the Monitor
In order to secure the monitor to the furniture, VTEL has provided special mounting brackets. The
front bracket is factory pre-installed onto the bottom of the monitor and is designed to slide under
and lock into two cabinet-top retainers, also factory pre-installed on the cabinet.
Do not attempt to
use the monitor without these brackets installed.
Pre-installed Monitor Front Bracket (Bracket shown through the monitor)
Front Monitor Bracket
Add the monitor as follows:
1. Unpack the monitor and place it on top of the cabinet, facing forward.
Do not
Do not Do not
Do not attempt to lift the monitor by yourself. It is very heavy.
2. Slide the monitor forward, until the lip of the front bracket locks into place between the
cabinet’s retainers. Make sure the front of the monitor is secure.
Sliding the Monitor Forward to Lock into the Retainers
3. Secure the rear of the monitor by installing the rear bracket. This procedure varies,
depending on whether you are installing an s-video or XGA monitor. This bracket will
accommodate both.
A. Secure the rear of an s-video monitor by clamping down on its rear ledge.
1) Position the rear bracket as shown below.