EN - 15
En
g
lish
Handset registration
Place the cordless handset on the telephone
base cradle. Handset registration happens
automatically the first time a cordless handset is
placed on the telephone base.
When the registration process completes, the
MESSAGE WAITING
LED flashes once and you
hear 3 rising beeps as confirmation.
Each telephone base accommodates up to
five cordless handsets. When you already have
five registered handsets, you can replace one
of them by a new handset if any one of the
five registered handsets is disconnected from
the base. For example, it is out of range, or its
battery is removed or depleted. The previous
registered handset is then deregistered from the
telephone base.
Handset deregistration
When a registered cordless handset is idle,
press
*331734#
, then press
HOLD
. You will hear
a confirmation tone when the deregistration
process completes.
Register a handset to another
telephone base
Any Next Gen cordless 1-line handset can register
to any Next Gen cordless 1-line telephone base.
When a registered cordless handset is idle,
place it on another telephone base. This
cordless handset automatically registers to the
new telephone base.
Handset battery charging
The battery must be fully charged before
using the cordless handset for the first time.
The
CHARGE
LED turns on when the cordless
handset is charging on the telephone base.
The battery is fully charged after 11 hours of
continuous charging. For best performance, keep
the cordless handset in the telephone base or
charging base when not in use.
