EN - 12
Installation option - converting
from desktop to wall mount position
To mount the telephone base on the wall
1. Unmount the base stand from the telephone
base. Disconnect all cords and cables from
the telephone base. Put the cordless handset
aside.
2. Turn the telephone base over with the bottom
side facing up.
3. Align the grooves with the wall mount bracket.
4. Slide the wall mount bracket up.
5. Connect the telephone as described in
"Telephone base installation" on page 11,
but connect the short telephone line cord
instead. Place the cords in the associated
cable ducts.
6. Mount the telephone base on the wall by
positioning the eyelets on the telephone
base and the mounting bracket against the
mounting studs. Then slide the telephone
base down on both mounting studs until it
locks into place.
7. Replace the handset on the telephone base
cradle.
To remove the wall mount bracket from
the telephone base
1. Slide the telephone base up to remove it
from the mounting studs on the wall.
2. Disconnect all cords and cables from the
telephone base.
3. Slide the wall mount bracket down and lift it
from the telephone base.
