EN - 16
Installation
Next Gen Cordless 1-line Accessory
Handset and Charging base -
NG-C3411HC
install charging base for desktop
To mount the base stand on the charging
base
1. Align the grooves of the base stand with the
charging base.
2. Slide the base stand up to secure it.
To unmount the base stand
Simply slide the base stand down and lift it from
the charging base.
Charging base installation
The telephone comes ready for desktop use.
1. Install the charging base as shown below.
• Make sure the power adapter is securely
plugged into an outlet not controlled by a
wall switch.
• The battery is fully charged after 11
hours of continuous charging. For best
performance, keep the cordless handset
in the charging base when not in use.
2. Press
on the handset. Listen for a dial
tone, and then press
again to hang up.
CAUTIONS
Use only the supplied power adapter.
The supplied power adapter is not designed for
use in any other IT devices. Misusing it on your
other IT devices shall be prohibited. To order a
replacement, call 1-888-907-2007.
