background image

EN - 23

En

g

lish

Share a call

A maximum of two cordless handsets can be 
used at the same time on an external call.

Handset speakerphone

During a call, press 

 on the cordless handset 

to switch between speakerphone mode and 
handset earpiece mode. The 

 key illuminates 

when in speakerphone mode.

Volume

Listening volume can be adjusted on the cordless 
handset and the telephone base.

Adjust the listening volume

• During a call on the handset, press 

 

  and  

 

to adjust the listening volume. 

The next call returns to the default listening 
volume.

• During a call on the telephone base, press 

VOL+ 

and 

VOL- 

to adjust the listening 

volume. The next call returns to the default 
listening volume.

Adjust the ringer volume of the telephone 
base

Ringer volume of the telephone base can be 
adjusted. When the telephone base is idle, press 

VOL+ 

and 

VOL-

 to adjust the ringer volume.

Call waiting

1.  When you hear a call waiting tone during a 

call, press 

on the cordless handset to 

put the current call on hold and take the new 
incoming call.

2.  Press 

at any time to switch back and 

forth between calls.

Mute

Mute the microphone

1.  During a call, press 

MUTE

 / 

• The 

MUTE

 / 

 key on the handset / 

telephone base illuminates when the mute 

function is turned on. You can hear the 
party on the other end, but they cannot 
hear you.

2.  Press 

MUTE

 / 

 again to resume the 

conversation.

• The light on the 

key turns off.

Speed dial

To dial a speed dial number, press a speed 
dial key ( for example,

 

 

CONCIERGE 

or 

 

FRONT DESK

). 

The speed dial keys on the telephone base are 
fewer than the speed dial keys on the cordless 
handset. For example, 

EMERGENCY 

is only 

available on the telephone base.

Telephone base: 8 dedicated speed dial hard keys, with 
2 additional hard keys (MESSAGE, EMERGENCY) that can 
be programmed as speed dial keys
Handset: 3 dedicated speed dial hard keys, with one 
additional hard key (

) that can be programmed as 

speed dial keys

Message waiting Indicator

When a voice message is received, the message 
waiting LED on the telephone base flashes.

Play messages

Press 

MESSAGE

 / 

  in idle mode to play 

messages.

Hold

To place a call on hold:

During a call, press the 

HOLD

 /   key.

To take the call off hold:

Press 

 or 

 on the handset, OR press 

on the telephone base.

Содержание Analog Next Gen C5012









































Отзывы: