13
Under fire alarm and feedback state, the system administrator is not
allowed to enter into the setting interface. This is because the system decides
emergencies have been detected and must be disposed preferentially. At this
moment, F1 key is in vain. However, the system debugger and the super user may
enter into the setting interface under fire alarm and feedback state as the system
decides it is under debugging or maintenance state currently.
The alarm interface will pop up in case of new alarms (including fire alarm and
faults), no matter what kind of operator is in the non-alarm interfaces, such as setting
interface. Then only the system debugger and the super user may re-enter into the
setting interface.
3.2.5 Input of characters
The system support three Chinese input methods: Quanpin input method / zone bit code
input method / T9 input method
Switching method:
Ctrl+Space (space key)
------ Switch to Chinese input method or exit Chinese
input method
Shift + Space (Space key)------Switch over Quanpin input method/zone bit code
input method
Zone bit code input method is cancelled when the panel keyboard is used for
operation only. Press “#” to switch over digital input/T9 input method/alphabet input.
3.2.5.1 Quanpin input method:
Only support word input, not support word group input;
Enter rightful phonetic alphabets and press S
PACE
key to prompt the lookup floating window
(as shown in Figure below);
Select according to word number 1-9 and press
＋
and
-
keys to turn pages for
the lookup character window;
Only support the mainland Standard Chinese phonetics.
Figure 3
‑
12 The character input interface for system renaming
3.2.5.2 Zone bit code input method
Only support word input. The corresponding Chinese characters will be input into the
cursor position after entering rightful zone bit code composed of 4 digitals
See National Standard Secondary Font Library Code for queries of zone bit code
3.2.5.3 T9 input method
Only support word input, not support word group input
Enter rightful phonetic alphabets and press “0” key to prompt the lookup floating
window
Select according to word number 1-9 and press
←
and
→
keys to turn pages for the
lookup character window
