10
Figure 3
‑
7 Normal prompt interface of the system operation
The prompt interface means the system has entered into the monitoring status.
3.2.3 Login operation of the users
Login in refers to the process of entering password by the users and identifying by the
system.
The users may operate the functions with the system complying with its identity after login
in.
The users may be divided into four categories based on different operating authorization:
Super user:
system designer (8-digital password)
System debugger:
System debugger of the manufacturer (8-digital password)
System administrator:
maintenance personnel of the user system (6-digital
password)
Watchman:
person on duty at the fire control room
(4-digital password)
The user classification aims to prevent possible mal-operation and
facilitate system maintenance and management.
The watchman is not allowed to enter the system setting interface and can
login in, check and operate through the panel keyboard only.
The system will record the operation content of each user to
facilitate the responsibility tracing; therefore the password shall be kept
strictly confidential and carefully managed and be kept away from irrelevant
personnel.
3.2.3.1
Login of super user, system debugger and system administrator:
Super user, system debugger and system administrator may login in the system by two ways.
1. Login in through standard USB keyboard. Pop up the login window by pressing Ctrl, Alt and
Del keys simultaneously (as shown below).
Figure 3-8 Example of USB keyboard
2. Press “*” key at the left bottom corner of the panel, and pop up the login window.
Login operation
Under not-logged-in state, press C
TRL
、
A
LT
+D
EL
on USB keyboard simultaneously, or press
"*" key at the left bottom corner of the panel, and pop up the password input window (as
shown below). Press E
NTER
key on USB keyboard or “OK” key on the panel keyboard after
entering the password.
