VProtect VPTZ500, Руководство пользователя и инструкции по эксплуатации

Страница: 5 / 24

4
Dwell time at preset position
1
－
60s available
Cruise Tour: 8 group
Cruise Points Qty per cruise group 16 preset positions
2.2. Camera Parameter for Intelligent High-speed Dome: VPTZ500 (Built in SONY Camera).
Mode ¼” Sony Exview (Day/Night) CCD
Sync Internal/ external
Scan 2:1 Interlace
Resolution >480 lines
Minimum illumination 0.7lux
Iris Auto/manual
Focus Auto/manual
Zoom
216 X (Optical 18x; Digital 12x)
Focal length f=4.1-73.8mm, F=1.4-3
Angle of view 47°(wide) , 2°(Tele-)
Backlight compensation backlight compensation
White balance Auto
Gain Auto
Signal PAL/NTSC
S/N ratio
>55dB
Video signal output 1.0±0.2Vp-p
III Setting, Installation, Connection
3.1 Dome Address, Transmission Speed, Protocol Setting
Before the dome is installed, the communication protocol, baud rate and dome address, should be
confirmed. Set the code switch, keeping the setting consistent with the control system. The relative code
switch site and connecting wire are diagramed below for reference.