VProtect VPTZ500, Руководство пользователя и инструкции по эксплуатации

Страница: 10 / 24

·
Housing Installation
A
Take out the housing from the carton, adjust the thickness of bolt reed more than that of ceiling.
B
Stick 3 ring to housing, and install the upper housing in the round hole of the ceiling, connecting
flange edge with the ceiling surface closely.
C
Use screwdriver to rotate the bolt of the ring, making the ring stick to the ceiling in order to
connecting flange edge with the ceiling surface closely.
Camera Module Installation
•
Turn power supply off prior to installation.
•
Loosen the two M5 screw on the bracket, which are located in the inner housing .
•
Take the camera module from the packing carton, and check if connecting wire plugs are loose. Set
code switch of the dome camera.
•
Secure the camera module (use one hand to hold stepping motor, preventing it from moving.). Insert
the wire terminal into the outlet on the end of camera module. Align two bar holes on the camera
module base with the two M5 bolt of the connecting bridge. Twist the camera module upward
ensuring the two M5 bolts reach the end of bar hole. Tighten the two M5 bolt to make camera module
fixed in the upper housing.
9