VProtect VPTZ500, Руководство пользователя и инструкции по эксплуатации

Страница: 17 / 24

1. In the Main Menu, input desired cruise group No.
Example: Desired Group No. is 4 the VKB300/200 keyboard displays:
2. Press Shift + Scan to place PTZ into cruise scanning.
OR
1. Move the joystick to desired position.
2. Input the running speed (1-64) and then input Shift + AUTO key.
Note: When VPTZ500 dome camera is under the auto scanning status, you can use the joystick if
you want it to stop scanning.
4.4 Guard Location
The guard location is an important position that the VPTZ500 camera will come back to automatically when
there is no operation for a defined period. The user can set a guard location and control the waiting time to
the guard location, starting and stopping (1-255S) before allowing the camera to return to the guard
location.
4.4.1 Setting the Guard Location
VPTZ500 Intelligent speed dome can set a guard location and waiting time.
Use the VKB300/200 keyboard to set the guard location and its waiting time.
Turning the Guard Location On/Off and Setting delay time to Guard Location
1. To set the guard location to start or stop (VKB300/200 recognizes this action as a Switch): ON Start
OFF Stop
Press F1 ON
Startup the guard location
Press F2 OFFStop guard location
Example: Press F1 ON to start up guard location. Dome will rotate to set position within XX seconds.
2. The keyboard default status displays the Main Menu. In the Main Menu screen, press the FUN key once,
VKB300/200 keyboard displays:
Displays Current Speed
dome address
3. Press Enter to Confirm.
4. Press the FUN key three times, VKB300/200 keyboard displays:
16