VProtect VPTZ500, Руководство пользователя и инструкции по эксплуатации

Страница: 7 / 24

With reference to the above chart: When all code switches are under “OFF” status on VPTZ500, address
code is 1. When you input Numerical key No.1 on VKB300/VKB200 control keyboard, then press CAM
key for confirmation showing that set VKB300/VKB200 address as No.1 control address., At this time,
VKB300/VKB200 keyboard can control VPTZ500 dome camera(its control address is 0001). Other
address is to be set as above.
6
3.1.2 VPTZ500 Dome Camera Communication Protocol Setting -
The 1st, 2nd and 3rd bits in SW2 are used to set communication protocol (see following figure)
3.1.3 VPTZ500 Dome Camera Transmission Speed Setting(Baud Rate Setting)
The 4th and 5th bits of SW2 on the PCB board are used to set the baud rate (see following figure).
The default baud rate setting is 9600.