19
2.6.13 Record Schedule
Use the Record page to set up to 16 automatic recording schedules. For each record
schedule, select the day and start and stop times for recording. For each camera, select off,
Normal Recording, Motion Detection Recording , GPI Trigger Recording or MD& GPI
Trigger Recording to record only when motion is detected. Enable Audio if you want to
record audio also. Weighted recording is setting special recording frame rate when an alarm
of one of camera was triggered. Select a Frame Rate of recording for each camera.
2.6.14
Set Motion Detection
a)You can enable or disable the motion detection function of one camera. If enabled, a 8x8
red block will be displayed on the top-left corner of the video window when motion
detected.
b)Set the sensitivity of camera, the value of sensitivity from 5 to 100. For indoor camera,
sensitivity setting is about 20.
c)Enable “Show Detect Area” will make the video inside the detection area becomes lighter.
It is convenient for configuration purpose.
You can move or change the detect area via mouse movements or key in X,Y Position
directly.
Weight recording
