VTAC HSD USER MANUAL: SECTION 1
VIRGINIA PANEL CORPORATION
1/9/19
1-2
For the most current information available, visit vpc.com
VTAC HSD 90 SERIES ITA MODULE PART IDENTIFICATION
PART # 510 171 101
This section will point out features designed to help determine the proper orientation
of the VTAC HSD 90 Series ITA module (
Figure A
)
,
as well as distinguishing features.
The top of the VTAC HSD 90 Series ITA module (
Figure B
) can be determined by the
position A1 indicator on the rear side, designated by the notch shown in
Figure D
.
When the module is oriented correctly, the position A1 notch will be visible in the
upper left corner.
The front and rear of the VTAC HSD 90 Series ITA Module are shown in
Figure C
. The
front mates with the VTAC HSD 90 Series Receiver Module.
The rear has the position A1 notch. The rear of the VTAC HSD 90 Series ITA module has
silkscreening along the side (
Figure D
). Wires exit the VTAC HSD 90 Series ITA module
from the rear side.
NOTE: The blue silkscreen indicates fi ve slot positions, as shown in
Figure D
.
Figure B. ITA module front view
(mating side).
Figure C. ITA module side
view.
Figure D. ITA module rear
view (wiring side).
Figure A. ITA module.
DETAIL B
TOP
EXTRACTION TOOL CAVITY
BOTTOM
FRONT
MATING
SIDE
REAR
WIRING
SIDE
INDICATES 5 POSITIONS
POSITION A1 INDICATOR
MOUNTING SCREWS TYP. 2 PLCS
2-56 TAPPED HOLES FOR
STRAIN RELIEF PLATE SCREWS
TY. 2 PLCS
