VTAC HSD USER MANUAL: SECTION 10
VIRGINIA PANEL CORPORATION
1/9/19
9-1
For the most current information available, visit vpc.com
VTAC HSD VERTICAL HEADER INSERT PART IDENTIFICATION
PART # 610 151 107
This section will point out features designed to help determine the proper orientation of the VTAC HSD Vertical Header Insert as well as
its distinguishing features. The mating side of the VTAC HSD Vertical Header Insert is opposite the compliant pins as shown in
Figure A
.
The faces of the contact are symmetrical. The fi rst pin location can either be Pin 1 or Pin 8 (
Figure B
).
The compliant pins are used to mount the insert to the PCB with use of insertion tool # 910 112 133 (
Figure C
).
COMPLIANT PINS
FRONT
MATING
SIDE
SIDE
MATING
SIDE
FACE A
FACE B
RECESSED SHOULDER
FOR INSERTION TOOL
Figure B. Both faces of the insert are symmetrical.
First pin location can be Pin 1 or Pin 8.
Figure C. Shoulders of insert are recessed for
insertion tool use.
Figure A. Identifying key features of the insert.
