Vortex 5943805045010, Руководство пользователя

Страница: 27 / 37

Chainsaw VO2811
8
Assembly
DANGER!
Risk of injury during operation!
Improperly mounted parts can cause
severe and even fatal injuries when
using the device! This device may
only be commissioned if all parts are
mounted completely and tightly and
no part is damaged!
• Therefore, read the whole chap-
ter before you assemble the
parts!
• Assemble the parts carefully and
completely.
• Use tools when their use is sug-
gested.
WARNING!
Risk of injury during assembly!
Parts may only be assembled and
disassembled when the motor is
switched off (de-energise device).
Note:
If one of the parts should be missing
or damaged, please contact the
vender.
CAUTION!
Risk of injuries due to cuts!
The teeth of the saw chain are very
sharp! Protective gloves must be
worn for all work on the chain.

Breathing in of particles from cut items
• Contact with petrol/oil
For this reason, it is essential that this chain
saw is always used with the additional per-
sonal protective equipment as shown on the
machine and described in these operating
instructions. It is also necessary to observer
the safety notes.
Your device at a glance
► P.2, item 1
1. Handle
2. Saw chain
3. Chain bar
4. Chain Adjustment Ring
5. Fastening Bolt for Chain Sprocket
Chain Wheel Cover
6. Sight glass for oil level
7. Rear hand guard
8. Hand guard
9. Handle
10. Fill opening for chain oil (tank cover)
11. Switch-on safety lock
12. Start button
13. Strain relief mechanism for extension
cable
14. Chain Wheel Cover
15. Tension Plate
16. Bar bolt
17. Sprocket
Scope of delivery
• Drive unit
• Saw bar
• Saw chain
• Protective cover
• Instructions for use
Assembling the saw bar and saw chain
–
Lay the saw on flat surface.
– Turn the fastening bolt (5) anti-
clockwise and loose the chain
adjustment ring
（
4
）
to remove the
sprocket chain wheel cover
（
14
）
.
–
To fit the new bar, place the bar (3) onto
the bar bolt (16) with the tensioning
plate (15) pointing outwards.
DANGER!
Risk of injury!
An improperly mounted saw chain
causes uncontrolled cutting behav-
iour of the device! When assembling
the chain, heed the prescribed run-
ning direction!