Vortex 5943805045010, Руководство пользователя

Страница: 34 / 37

Chainsaw VO2811
15
DANGER!
Danger of death!
A worn or improperly sharpened
chain can cause rebounds. Severe or
even fatal injuries can be the result!
Note:
Special tools are required to sharpen
the saw chain; these guarantee that
the cutting of the chain occurs at the
correct angle and the correct depth.
We recommend that you have the
saw chain sharpened by a profes-
sional.
– Loosen the fastening bolt (5) by
approxi- mately one turn.
– Lift the tip of the saw bar slightly.
– Tighten the Chain Adjustment Ring for
chain tension (4) until the chain lies
on the underside of the saw rail.
Lubricating chain wheel
►
P. 5, item 9
The bearing of the chain wheel should be
regularly lubricated at the front-end of the
rail. About 1× in a week in case of intensive
use.
– Clean the lubrication hole.
– Apply little multi-purpose grease in the
lubrication hole, while moving the chain
with hand.
Sharpening the saw chain
• Let the device cool down before you
store it.
• Store the device as horizontally as possi-
ble.
Longer downtimes
If you are not going to be using the device for
a while, remove the chain oil from the device.
Store the device in a dry place.
Transport
If you are transporting the device in a vehicle:
– Slip the protective cover onto the cutting
tool.
– Secure the device against slipping.
– If possible, use the original packaging for
dispatching.
Faults and remedial measures
When something isn’t working…
Storage and transport
Storage
Often only small faults cause a malfunction.
You can usually easily remedy such faults
yourself. Please consult the following table
before contacting your local store. This
saves effort and possibly also costs.
Fault/malfunction Cause Remedial measure
Motor not running. No mains voltage? Check cable, plug, socket
and fuse.
Cable faulty? Have replaced by an electri-
cian.
DANGER!
Risk of injury!
Make sure that unauthorized persons
do not have access to the device!
DANGER!
Risk of injury!
Improperly performed repairs can
lead to the device not functioning
safely. This endangers yourself and
your environment.