VorTek SonoPro S36 Series, Инструкция по эксплуатации

Страница: 28 / 107

Series S36 Instruction Manual Chapter 2 Installation
800120 2-16
Figure 2-18. Mounting Bracket with Both U-Bolts and Nuts
7. Gather the four socket head cap screws, lock washers, and nuts provided
with your flowmeter.
8. Now that the mounting bracket is fully secured to the pipe, the enclosure
can be attached to the bracket. To prepare the enclosure for mounting, un-
screw the four Phillips head screws from the top of the enclosure so that
the lid can be opened, and the mounting holes underneath can be seen.
9. With the lid opened, align the four mounting holes on the enclosure shown
in Figure 2-19 with the four mounting holes on the mounting bracket.
Figure 2-19. Aligning Enclosure with Mounting Bracket
10. Using the socket head cap screws provided, feed one screw through the
enclosure and through the mounting bracket as shown in Figure 2-20.