Volvo XC 60 TWIN ENGINE, Руководство пользователя

Страница: 421 / 620

STARTING AND DRIVING
}}
419
The drive mode is optimised for maximum per-
formance and response during acceleration. It
changes the internal combustion engine's accel-
erator pedal response, gear shift pattern and
boost pressure system. Chassis settings, steering
and brake response are also optimised. Power
drive mode is always available regardless of the
battery's state of charge.
INDIVIDUAL
•
Adapting a drive mode according to individ-
ual preferences.
Select a drive mode to start from, and then adjust
the settings according to the desired driving cha-
racteristics. These settings are saved in an indi-
vidual driver profile.
An individual drive mode is only available if it is
first activated in the centre display.
Settings view 5 for individual drive mode.
1. Press Settings in the top view.
2. Press
My Car Individual Drive Mode and
select
Individual Drive Mode
.
3. In Presets , select a drive mode to start from:
Pure
,
Hybrid
or
Power
.
Possible adjustments apply to settings for:
•
Driver Display
•
Steering force
•
Powertrain Characteristics
•
Brake Characteristics
•
Suspension Control
•
ECO Climate .
Using the internal combustion engine
An advanced control system determines the
extent to which the car is driven on internal com-
bustion engine, electric motor or both in parallel.
The primary function is to use the engine or
motor and the available energy in the hybrid bat-
tery as efficiently as possible, with regard to the
characteristics of the different drive modes as
well as the driver's request for power via the
accelerator pedal.
There are also cases where temporary limitations
in the system, or functions governed by legal
requirements aimed at maintaining a low level of
total emissions for the car, may use the internal
combustion engine to a greater extent.
5 The figure is schematic, the layout may vary depending on car model or updated software.