Volvo XC 60 TWIN ENGINE, Руководство пользователя

Страница: 527 / 620

WHEELS AND TYRES
* Option/accessory. 525
Calibrating tyre monitoring
*
In order for the Indirect Tyre Pressure Monitoring
System (ITPMS) to work correctly, a reference
value for the tyre pressure must be determined.
This must be performed each time the tyres are
changed or the tyre pressure is changed.
For example, when driving with a heavy load or at
high speed above 160 km/h (100 mph), the tyre
pressure should be adjusted in accordance with
Volvo's recommended tyre pressure values. Fol-
lowing which, the system must be recalibrated.
1. Switch off the car.
2. Inflate the tyres to the desired pressure in
accordance with the tyre pressure label on
the door pillar on the driver's side.
3. Start the car.
4. Open the Car status app in the app view.
5. Press TPMS .
NOTE
The car must be stationary when calibration is
started.
6. Press Calibrate
.
7. Tap on OK
to confirm that the tyre pressure
in all four tyres has been checked and
adjusted.
8. Drive the car.
Calibration is performed when the car is
driven at a speed above 35 km/h (22 mph).
Calibration is interrupted temporarily if the
engine is switched off, but is resumed auto-
matically in the background when the car is
driven again.
> When sufficient data has been collected
to enable the system to detect low tyre
pressure, the tyres in the centre display
change colour from grey to green. The
system provides no additional confirma-
tion that the calibration is complete.
If calibration fails, a message is shown:
Calibration unsuccessful. Please try
again.
.
NOTE
Remember that the TPMS system must be
recalibrated at each tyre change or if the tyre
pressure is adjusted. New reference values
must be stored for the system to work cor-
rectly.
Related information
•
Tyre monitoring
*
(p. 521)
•
Checking tyre pressure with the tyre monitor-
ing system
* (p. 523)
•
Rectifying low tyre pressure with tyre moni-
toring
*
(p. 524)