DRIVER SUPPORT
339
Setting the warning distance for City
Safety
City Safety is always activated but the driver can
select the warning distance for the function.
The City Safety function cannot be deacti-
vated. It is activated automatically when the
engine/electric operation is started and
remains switched on until the engine/electric
operation is switched off.
The warning distance determines the sensitivity
of the system and regulates the distance at
which the visual, acoustic and haptic warnings
shall be triggered.
To select warning distance:
1. Select
Settings
My Car
IntelliSafe
in
the centre display's top view.
2. Under
City Safety Warning
, select
Late
,
Normal
or
Early
to set the desired warning
distance.
If the
Early
setting produces too many warnings,
which could be perceived as irritating in certain
situations, the
Normal
or
Late
warning distance
can be selected.
When warnings are perceived as being too fre-
quent or disturbing, the warning distance can be
reduced, which reduces the total number of
warnings and instead leads to City Safety giving a
warning at a later stage.
The
Late
warning distance should therefore only
be used in exceptional cases, as in dynamic driv-
ing.
WARNING
•
No automatic system can guarantee
100 % correct function in all situations.
Therefore, never test City Safety by driv-
ing at people, animals or vehicles - this
may cause severe damage and injury and
risk lives.
•
City Safety warns the driver when there is
a risk of a collision, but it cannot shorten
the driver’s reaction time.
•
Even if the warning distance has been set
to
Early
warnings could be perceived as
being late in certain situations, e.g. when
there are large differences in speed or if
vehicles ahead suddenly brake heavily.
•
With the warning distance set at
Early
,
the warnings will come more in advance.
This may mean that the warnings come
more frequently than at the warning dis-
tance
Normal
, but it is recommended
since it can make City Safety more effec-
tive.
The warning with direction indicators for Rear
Collision Warning is deactivated if the warn-
ing distance for collision warning in the City
Safety function is set at the lowest level
"
Late
".
The seat belt pre-tensioning and braking
functions are, however, still active.
Related information
•
•
Detection of obstacles with City Safety
(p. 340)
•
City Safety with evasive manoeuvres (p. 343)
•
City Safety when evasive manoeuvres are
prevented (p. 345)
•
City Safety in cross traffic (p. 342)
•
Limitations of City Safety (p. 346)
•
Messages for City Safety (p. 348)
•
Содержание XC 60 TWIN ENGINE
