Heating and ventilation system with manual air conditioning
To obtain maximum heat:
Note that a certain amount of air always
enters through the air vents in the instrument
panel if they are open, irrespective of the
position of the mode selector.
To obtain maximum air flow to the floor or
windows, shut the air vents. If the windows
mist up, open the two air vents at the sides.
This is the coolest setting:
Control temperature with the temperature
control if it gets too cold
.
Setting for demisting windows:
The air conditioning system can be used to
clear mist effectively from the windows
even at low outdoor temperatures.
Move the function selector to position
and turn the air
conditioning
on.
When the mist has disappeared, set the fan
control to speed 2.
A few hints:
•
The air conditioning system can be used at
ambient temperatures as low as 0
°
C.
•
The fan must be set to at least speed 1 for
the air conditioning system to function.
•
When air conditioning is switched on the
temperature can be adjusted with the temp-
erature selector.
•
Use your air conditioning system regularly
to maintain it in good condition.
Use this setting for a few minutes to
exclude exhaust fumes from surrounding
cars or to heat up/cool down interior quickly.
With this setting, no fresh air is brought into
the car. Remember not to drive with this
function activated for more than 10 or 15
minutes, otherwise you will risk an accumu-
lation of stale air and mist inside the car.
Windows may mist up when this setting is
used in cold or damp weather.
Adjust the temperature with the temperature
selector.
For additional information see page 1:28...
Shut the two middle air vents and the air mix
control.
Open the air vents.
Shut the two middle air vents and the air mix'
control.
1:25
All manuals and user guides at all-guides.com
all-guides.com
