Cruise control
WARNING!
The cruise control should not be used in
heavy traffic or when driving on wet or
slippery roads. Note: When driving on
hills, the actual vehicle speed may vary
slightly from the set cruise control speed.
Engagement
The cruise control switches are located on
the direction indicator stalk.
To engage and set the desired speed:
1 Set switch B in the ON position.
2 Accelerate or decelerate to the desired
speed.
Note: The cruise control cannot be
engaged at speeds below 22 mph (35 km/h).
3 Press the + or - area of the SET button (A)
to engage the desired speed.
Reducing speed
The cruise control is automatically disenga-
ged if the brake or clutch pedal is pressed. The
previously selected cruise speed is retained in
the memory; by momentarily pushing switch B
towards the RESUME setting, that speed
will be re-engaged.
Acceleration
Momentary acceleration such as for overtaking
does not interrupt cruise control operation. The
previous set speed will be maintained without
having to set the switch to RESUME.
If the cruise control is already engaged, the
cruising speed can be increased or decreased
by pressing the SET button (A) towards either
+ or -. One short activation of the SET button
corresponds to a speed change of +/-1 mph (1.6
km/h). The current speed of the vehicle when
the button is released will now be programmed.
Disengagement
Set switch (B) to the OFF position or depress
the brake or clutch pedal. If the ignition is
switched off or the gear selector lever is in
position N, the cruise control system will
automatically disengage. If the speed decre-
ases to 70% of the set speed the cruise con-
trol will automatically disengage. This also
occurs if the wheels spin or lock.
Automatic transmission
When the car is driven in hilly terrain, there
may be a tendency for the gearbox to hunt
between different gears. You can avoid this
by manually selecting a lower gear or chang-
ing driving mode.
1:19
All manuals and user guides at all-guides.com