Paintwork damage
•
For scratches proceed as already described
but it may be advisable to use masking
tape to protect the undamaged paintwork
surrounding the scratches (diagram 3).
•
Wait a day or two before applying the
finishing coat. Use a soft rag to apply
the grinding paste and polish off any
blemishes. Apply the paste sparingly.
Touching-up wing edges and sills
Materials:
•
Primer (aerosol spray)
•
Paint (aerosol spray)
•
Masking tape
When large surfaces have to be repainted,
suitably mask the surrounding area with mask-
ing tape and paper. Remove the masking imme-
diately after the final coat has been sprayed on,
before the paint dries.
•
Remove loose paint flakes with masking
tape.
•
Shake the aerosol can for at least 1 minute.
Spray on the primer. Move the spray can
slowly and regularly from side to side,
about 20-30 cm from the surface, as shown
in the diagram. Use cardboard sheets to
protect the surrounding area.
•
When the primer has dried, apply the
surface enamel in the same way. Spray on
several times and allow the paint to dry
for a few minutes between each application.
Hold the aerosol vertically
All manuals and user guides at all-guides.com
