Heating and ventilation system with automatic air conditioning
Optimum demist
Set the function selector on
AUT
and
select temperature. If the driver's side tempe-
rature selector is set to either max heating or
cooling, the fan will operate at its highest
speed.
Automatic setting
ECC
(Electronic Climate Control)
The Climate Control system automatically
maintains the desired temperature in the car
irrespective of the temperature outside.
The system uses the fastest method available
to achieve the desired temperature.
Choosing a higher or lower setting than actually
needed will have little effect on the speed of
heating/cooling.
The temperatures achieved will not corre-
spond exactly to the settings on the controls
since the actual physical temperature takes
into account factors such as air speed/humidity
and intensivity of sunlight on driver's and
passenger side.
Additional information
maximum
heatin
g
•
For optimum automatic function, always
leave air vents at the sides open. A certain
amount of air always enters through the air
vents, if they are open, irrespective of the
position of the function selector. To obtain
maximum air flow to the floor or windows,
shut the air vents. If side windows mist up,
open the two air vents at the sides.
In cold weather, close the centre air vents to
obtain the most comfortable temperature in
maximum cooling
the car.
•
Optimum automatic function is obtained
when the air conditioning is engaged.
The air conditioning can be used at ambient
temperatures as low as 0
°
C.
Select
AC OFF
when you want to switch
off the air conditioning and reduce fuel con-
sumption.
Use your air conditioning regularly to main-
tain it in good condition.
•
REC
Select this function if you wish to
prevent unpleasant exhaust fumes entering
the car for a few minutes. Air will not enter
the car with the selector at this position. Only
use this for 10-15 minutes otherwise the air
can become stale. When using this function
in winter or in wet weather, the windows
may mist up. Recirculation is automatically
engaged on cooling in warm weather if the
fan switch is in the
AUT
position.
This can also be used for rapid heating/coo-
ling when the fan is manoeuvred manually.
1:27
Set the function selector at
In this position the air conditioning is engaged
and the air does not recirculate regardless of
the position of the
REC
and
AC OFF
buttons.
All manuals and user guides at all-guides.com
