Front seats
WARNING!
When adjusting the seat, make sure there
are no objects in front of or behind it.
Also be sure that rear-seat passengers
have sufficient room. Children must not
play with adjustment switches.
Electrically operated driver and
passenger seats (extra equipment)
If your Volvo is equipped with electrically
operated seats you can adjust the position of the
following using the two switches:
Height of the front of the seat
(A)
Forward - back
(B)
Height of the back of the seat
(C)
The angle of the backrest
(D)
The ignition key need not be in the ignition
when seats are adjusted.
For safety reasons adjustment stops if one of
the switches is released.
Memory function
Programming:
Three positions can be stored. When the seat
has been adjusted hold in the MEM button
and at the same time press button 1.
Further seat positions can be saved in memory
using buttons 2 and 3.
Adjustment:
Hold one of the memory buttons 1, 2 or 3 down
until the seat stops.
If the memory button is released adjustment
will immediately be interrupted for safety
reasons.
Emergency stop:
If the seat starts moving unintentionally press
one of the buttons and it will stop.
Note! Electrically operated front seats have
an overload protector which is activated if a
seat is blocked by an obstacle. If this hap-
pens, wait for about 20 seconds before using
the seat again.
2:7
All manuals and user guides at all-guides.com
