Volvo 32200, Руководство оператора

Страница: 207 / 390

Press the attachment against the ground. In this position move
the bucket cylinder in and out to check that the lock wedge is
in the correct position.
If you are uncertain about whether the attachment is securely
locked, exit the machine and check if the lock wedge is properly
locked.
N N OT T E E ! !
Do not use the machine, if the attachment quick coupler is not
working.
Contact a workshop authorized by Volvo, if anything is wrong.
Di i s s con n n n e e c c ti i n n g g at t t t a a c c hm m e e n n t t
WA A R R N N I I N N G G
Risk of crushing!
Attachments that move unexpectedly can cause injuries.
Mak
k e sur r e pe e op p l l e e sta a y out of f th h e e wor r kin n g area a when con n n n ecti i ng
or r discon n n n ec c ti i ng att t a a c c hm m ents s .
1 Place the machine on level and firm ground and lower the
boom.
Curl the bucket fully towards the machine to protect the bucket
from falling down during opening procedure.
2 Initiate the opening of the attachment quick coupler as follows:
Push the red button (1) of the attachment quick coupler switch
(2) on the right instrument panel and push down the upper end
of this switch simultaneously. The switch will be locked in this
position.
A yellow quick coupler symbol and a check message for
unlocked quick coupler will appear in the IC (Instrument
Cluster). Additionally the buzzer sounds continuously.
3 Open the attachment quick coupler as follows:
Press down and hold the upper end of the spring returned
quick coupler confirmation switch (3) on the left instrument
panel for 1 second.
A red quick coupler symbol and a warning message for
unlocked quick coupler will appear in the IC (Instrument
Cluster).
Curl the bucket fully in to open the quick coupler. If necessary,
the release pressure can be increased by driving the bucket
cylinder to its end position.
4 When the red indicator pin on the quick coupler extends fully
and the green indicator is completely withdrawn (depending
on the attachment quick coupler version), release the
attachment from the quick coupler by carefully moving the
bucket cylinder to its inner position (bucket out).
If the red indicator pin not extends fully and the green indicator
is not completely withdrawn (depending on the attachment
quick coupler version), increase the hydraulic pressure to the
locking cylinder by carefully moving the bucket cylinder to its
outer end position (bucket in).
V1065838
V1148410
1
2
2 - Attachment quick coupler switch (right
instrument panel)
V1148413
3
3 - Attachment quick coupler confirmation switch
(left instrument panel)
Op p e e r r a a t t i i n n g g te e c c hn n i i q q u u e e s s
Att t a a c c hm m e e n n t t s s , con n n n e e c c ti i n n g g an n d d di i s s con n n n e e c c ti i n n g g 20 0 5 5
www. duma -rent.com