Other Vessels Settings
CAUTION
The Beeper setting must be turned on to make alarms
audible (
). Failure
to set audible alarms could lead to injury or property
damage.
When your compatible chartplotter is connected to an AIS
device or VHF radio, you can set up how other vessels are
displayed on the chartplotter.
Select
Options
>
Settings
>
Other Vessels
.
AIS
: Enables and disables AIS signal reception.
DSC
: Enables and disables digital selective calling (DSC).
Collision Alarm
: Sets the collision alarm (
AIS-EPIRB Test
: Enables test signals from Emergency
Position Indicating Radio Beacons (EPRIB).
AIS-MOB Test
: Enables test signals from man overboard
(MOB) devices.
AIS-SART Test
: Enables test transmissions from Search
and Rescue Transponders (SART).
Settings that are Synced on the Garmin
Marine Network
Garmin ECHOMAP
™
and GPSMAP chartplotters sync
certain settings when connected to the Garmin Marine
Network.
The following settings are synced, if applicable, to the
device.
Alarm Settings (also syncs alarm acknowledgment):
• Arrival
• Anchor Drag
• Off Course
• GPS Accuracy
• Shallow Water
• Deep Water (Not available in the GPSMAP 8400/8600
series)
• Water Temp.
• Contour (Not available in echoMAP 70s and GPSMAP
507/701 series)
• Fish
• Collision Alarm
General Settings:
• Auto Guidance Preferred Depth
• Auto Guidance Vertical Clearance
• Beeper
• Color Mode
• Keyboard Layout
• Language
• Map Datum
• Heading
• Position Format
• System Units
• Calibrate Water Speed
• Radar Antenna Size
Chart Settings:
• Chart Borders
• Hazard Colors
• Heading Line
• Land POIs
• Light Sectors
• Navaid Size
• Navaid Type
• Photo Points
• Preferred Depth
• Shallow Shading
• Service Points
• Vessel Icon (Cannot be synced between all models)
Restoring the Original Chartplotter Factory
Settings
NOTE:
This affects all devices on the network.
1
Select
Options
>
Settings
>
System
>
System
Information
>
Reset
.
2
Select an option:
• To reset the device settings to the factory default
values, select
Reset Default Settings
. This restores
the default configuration settings, but does not
remove saved user data, maps, or software
updates.
• To reset all settings in all devices in the station
to the factory default values, select
Reset Station
Settings
. This restores the default configuration
settings, but does not remove saved user data,
maps, or software updates
• To clear saved data, such as waypoints and routes,
select
Delete User Data
. This does not affect maps
or software updates.
• To clear saved data and reset device settings to the
factory default values, disconnect the chartplotter
from the Garmin Marine Network, and select
Delete
Data and Reset Settings
. This does not affect
maps or software updates.
Sharing and Managing User Data
WARNING
This feature allows you to import data from other
devices that may have been generated by third parties.
Garmin makes no representations about the accuracy,
completeness, or timeliness of data that is generated by
third parties. Any reliance on or use of such data is at your
own risk.
88
Sharing and Managing User Data