Volvo Penta 8400, Руководство пользователя

Страница: 94 / 108

XTE Precision : Adjusts the number of digits to the right of
the decimal point for NMEA crosstalk error output.
Waypoint IDs : Sets the device to transmit waypoint
names or numbers using NMEA 0183 while navigating.
Using numbers may resolve compatibility issues with
older NMEA 0183 autopilots.
Restore Defaults : Restores the NMEA 0183 settings to
the original factory default values.
Diagnostics : Displays NMEA 0183 diagnostic
information.
Configuring NMEA 0183 Output Sentences
You can enable and disable NMEA 0183 output
sentences.
1 Select Options > Settings > Communications >
NMEA 0183 Setup > Output Sentences .
2 Select an option.
3 Select one or more NMEA 0183 output sentences, and
select
Back .
4 Repeat steps 2 and 3 to enable or disable additional
output sentences.
Setting the Communication Format for Each NMEA
0183 Port
You can configure the communication format for
each internal NMEA 0183 port when connecting your
chartplotter to external NMEA 0183 devices, a computer,
or other Garmin devices.
1 Select Options > Settings > Communications >
NMEA 0183 Setup > Port Types .
2 Select an input or output port.
3 Select a format:
• To support the input or output of standard NMEA
0183 data, DSC, and sonar NMEA input support for
the DPT, MTW, and VHW sentences, select
NMEA
Std. .
• To support the input or output of standard NMEA
0183 data for most AIS receivers, select NMEA
High Speed .
• To support the input or output of Garmin proprietary
data for interfacing with Garmin software, select
Garmin .
4 Repeat steps 2 and 3 to configure additional input or
output ports.
NMEA 2000 Settings
Select Options > Settings > Communications > NMEA
2000 Setup .
Device List : Displays the devices connected to the
network and allows you to set options for some
transducers connected using the NMEA 2000 network.
Label Devices : Changes the labels for available
connected devices.
Naming Devices and Sensors on the Network
You can name devices and sensors connected to the
Garmin Marine Network and the NMEA 2000 network.
1 Select Options > Settings > Communications .
2 Select Marine Network or NMEA 2000 Setup >
Device List .
3 Select a device from the list on the left.
4 Select Review > Change Name .
5 Enter the name, and select Done .
Marine Network
The Marine Network allows you to share data from
Garmin peripheral devices with the chartplotters quickly
and easily. You can connect a chartplotter to the Marine
Network to receive data from and share data with other
devices and chartplotters that are compatible with the
Marine Network.
Select
Options > Settings > Communications > Marine
Network .
EVC Network
Select Options > Settings > Communications > EVC
Network , and select a driveline.
For more information, refer to the Volvo Penta manual.
Features : Shows a list of installed EVC features.
Components : Shows a list of installed hardware
components.
Software : Shows a list of software versions for installed
EVC features.
Calibration : Shows a list of installed EVC features that
can be calibrated.
Setting Alarms
CAUTION
The Beeper setting must be turned on to make alarms
audible (
Sounds and Display Settings , page 81 ). Failure
to set audible alarms could lead to injury or property
damage.
Navigation Alarms
Select Options > Settings > Alarms > Navigation .
Arrival : Sets an alarm to sound when you are within a
specified distance or time from a turn or a destination.
Anchor Drag : Sets an alarm to sound when you exceed a
specified drift distance while anchored.
Off Course : Sets an alarm to sound when you are off
course by a specified distance.
Boundary Alarms : Disables and enables all boundary
alarms.
Setting the Anchor Drag Alarm
You can set an alarm to sound if you have moved more
than an allowable distance. This is very useful when
anchoring overnight.
1 Select Options > Settings > Alarms > Navigation >
Anchor Drag .
2 Select Alarm to turn on the alarm.
84 Device Configuration