background image

 

 

 

 

1234_BA_E_Rev0 - VOLspeed Giant Syncdrive Sport/Pro V4 

© TLI Elektronik GmbH 

 

 

3.2

 

Warranty, guarantee and liability by the manufacturer of the e-bike  

Due to the higher speeds with electric motor assistance, higher loads and forces will act on all 
bicycle parts. 

Reaching higher speeds increases wear on all bicycle parts, especially the braking system and all 
parts of the drive system, even if the vehicle is of suitable strength and design. 

For this reason, liability, warranty and guarantee claims against the dealer or manufacturer of the e-
bike will expire or be severely limited with the use of the tuning module. 

   

3.3

 

Property damage and personal injury - Further exclusions of liability to be considered  

An e-bike can reach electric motor-assisted speeds of up to 45 km/h after the tuning module has 
been installed. Reaching such speeds increases the risk of a fall and resulting injury, even with 
suitable strength and design of the vehicle. It also increases the risk of damaging other people or 
property. 

Reduce increased liability risks 

 

Precisely define your operating conditions and user groups to be insured. 

 

Take out liability insurance appropriate to the conditions of use and the user group for the use 
of your tuned e-bike. 
 

Reduce increased risk of hazards 

 

Always wear suitable protective clothing and a helmet while using your tuned e-bike to protect 
yourself from increased risk of accidents. 

 

Insist that every user of your tuned e-bike wears appropriate protective clothing and a helmet 
at all times during use. 
 

Reduce the risk of accidents monetarily 

 

Precisely define your operating conditions and user groups to be insured. 

 

Take  out  an  insurance  policy  for  the  use  of  your  tuned  e-bike  that  is  appropriate  to  the 
conditions of use and the user group. 

 

     ATTENTION

 

  WARNING

 

     ATTENTION

 

Содержание Giant Syncdrive Core

























Отзывы: